2026
DHR’s automation for metal 3D printers, built and proven on the xBUILD 3000, handles printing, cylinder changes and powder sieving, so the next print starts as soon as the last one ends. The robotic cell runs live at Formnext 2026.
Metal 3D Printing
Automation

Intro
A DHR Engineering proof of concept on the Atlix xBUILD 3000
Metal powder bed fusion (PBF) excels at producing complex geometries like internal cooling channels and lattice structures, parts that are often uneconomical or very hard to machine. This capability has driven its adoption for true series production across aerospace, energy, medical, and tooling.
Yet, while the melting process itself is highly advanced, the turnaround between builds remains a bottleneck of manual labor. In many standard production setups, manufacturers report losing up to a third of their potential machine time waiting for finished builds to cool, be unpacked, and undergo depowdering.
To reclaim that lost time, DHR Engineering automated the printing workflow on the Atlix xBUILD 3000, both inside and outside the printer. Integrated with a custom lid system inside the printer, the machine transitions from one build to the next automatically, paving the way for up to 98% machine utilization.
On the outside, an industrial robot handles every container required between builds: the work cylinders holding the parts, the supply cylinders feeding fresh powder, and the recovery container for leftover powder. Because series production rarely stops at one machine, the architecture is fully scalable. Additional printers and automation hardware can be seamlessly integrated as capacity demands grow.
We are showing the cell running at the Atlix booth at Formnext 2026 in Frankfurt, 17 to 20 November.

Problem
Where does a metal printer lose its time?
A metal printer is an expensive machine, and its business case depends on how many hours a day it prints. In a production environment, manual handling introduces four main challenges:
Idle time between builds. A build ends when it ends, not when a shift starts. Each hour a finished cylinder waits for someone to unload it is an hour the printer is not printing.
Changeovers multiply with product mix. In high-mix, low-volume production, builds are shorter and job changes are more frequent. The more often you change jobs, the larger the share of machine time lost to handling.
Heavy lifting and powder exposure. Work and supply cylinders are filled with metal powder and are heavy. Every swap means lifting, carrying and positioning them manually.
Room for errors in job setup. Each new build is set up manually: the operator selects the job, loads the right part file and checks that the machine is ready. When this is repeated many times a week, mistakes happen, and a wrong build costs both machine time and powder.
The Atlix xBUILD 3000 serves as a perfect showcase for this concept demonstration. Built for series production with up to two lasers and a 300 x 300 x 400 mm volume, it handles a wide range of alloys, while its removable build cylinders and closed powder system make it an ideal platform for robotic tending.


What we did
Parallel Processing for More Output and Minimum Downtime
The efficiency of this cell lies in its timing. The robot orchestrates supply cylinder swaps, recovery container transfers, and powder reclaiming at the sieving station while the printer is actively building. By the time the laser stops, the powder logistics for the next job are already finished.
Because the xBUILD 3000 has removable build cylinders, the printer can keep working while parts are unpacked at a separate station, which increases the printing hours of the machine. This enables continuous printing, as the printer only stands still for the physical exchange of the work cylinder itself.
The Hardware
DHR engineered the complete surrounding hardware to make seamless integration and robotic tending possible:
Universal Fork Gripper: A custom end effector lifts and positions all three container types.
In-Chamber Lid Automation: A custom pneumo-mechanical system opens and closes container lids inside the printer.
Buffer Storage: A custom storage unit queues fresh work cylinders and full supply cylinders, allowing the cell to run multiple consecutive jobs.
Machine panelling: Custom panelling to integrate the printer and the sieving station with the robot's access points.
Since the robot transfers closed work cylinders, supply cylinders, and recovery containers, the automation works identically regardless of the alloy being printed.

Conclusion
What does the cell change on the production floor?
By handling every physical transfer from one print to the next, this robotic cell is engineered to achieve up to 98% printer utilization. In a production environment, that single metric changes everything:
Higher Machine Uptime: Eliminating the wait time between builds increases printing hours. This is a massive advantage for high-mix, low-volume production with frequent changeovers.
Enhanced Safety: No manual lifting of heavy, powder-filled cylinders and reduced contact with powder.
Elevated Roles for Specialists: Optimized staff capacity for high-value skilled work.
From one printer to a manufacturing line
While this proof of concept features one printer, one powder handling station, and one robot, the architecture is designed to scale. The system can expand to multiple printers sharing a sieving station, or utilize a robot mounted on a linear rail to tend several machine clusters simultaneously.
Where this fits in our additive manufacturing work
Metal is the latest process in our additive manufacturing automation, after FDM, resin and SLS printing. Across those projects we have automated build plate handling, chamber swaps, machine maintenance, and material logistics.
Metal asks more of the automation than any of those: heavier payloads, finer and combustible powder, and an inert atmosphere to protect. We approach it the same way. Mechanical design, electrical engineering, robotics, controls and software are all done in-house, and we choose the robot to fit the application rather than the other way round.
If you want to explore how this automation architecture could scale across your specific metal printers, contact our team.




